specification control drawing te connectivity 300 constitution drive, menlo park, ca. 94025, u.s.a. raychem title: soldersleeve wire splice unless otherwise specified dimensions are in millim eters. [inches dimensions are shown in brackets] document no.: d-1744-01/-02/-03/-04 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. prod. rev.: see table doc. issue: 6 date: 15-apr-11 prepared by: mforonda dcr number: d040063 replaces: d030265 cage code : 06090 scale: --- size: a sheet: 1 of 1 print date: 9-may-11 ? 2011 tyco electronics corporation, a te connectiv ity ltd. company. all rights reserved. if this document is printed it becomes uncontrolled . check for the latest revision. product revision product dimensions wire dimensions ?d product name l max ?a min ?b min max min cma range d-1744-01 b 29.70 (1.170) 1.90 (0.075) 2.40 (0.095) 1.90 (0.075) 0.50 (0.020) 350 to 2000 d-1744-02 c 30.15 (1.187) 2.80 (0.110) 3.15 (0.125) 2.80 (0.110) 0.80 (0.030) 2000 to 4000 d-1744-03 b 29.60 (1.165) 4.60 (0.180) 5.10 (0.200) 4.57 (0.180) 1.30 (0.050) 4000 to 10000 d-1744-04 b 30.00 (1.180) 7.11 (0.280) 7.62 (0.300) 7.11 (0.280) 2.00 (0.080) 10000 to 13000 materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluorid e. 2. solder preform with flux and thermal indicator: solder: type sn63 per ansi/j-std-006. flux: type rol1 per ansi/j-std-004. thermal indicator: violet 3. meltable rings: thermally stabilized thermoplas tic. color: gray. application 1. these parts are designed to provide an environme nt resistant in-line splice in wires having tin or silver-plated conductors and insulation rated for at least 125 ? c. 2. temperature range: -55 ? c to +150 ? c. 3. install using te connectivity/ raychem-approved convection or infrared tools in accordance with te connectivity/ raychem installation procedure rpip-850-00. 4. assemblies will meet requirements of te connecti vity / raychem specification rt-1404 and national aerospac e standard nas-1744. for best results, prepare the wire(s) as shown:
|
